Automatic Film Processors

Konica Processors

SRX-101 A

 

 The Konica SRX-101A is a three speed table top processor that produces high quality radiographs with ease of operation in any low volume application. The SRX-101A features a new design offering easy maintenance and serviceability. It is the ideal choice for imaging centers, diagnostic centers and private practices such as veterinary, chiropractic, podiatry and even mobile image applications. It is not recommended for mammographic applications.


Features:

Offers three process speeds: 90 seconds Super Rapid processing cycle, 120 second Standard processing cycle and 180 second Extended processing cycle.
State of the art technology for precise microprocessor controlled temperature and replenishment. Replenishment according to film size.
A 17" Light Tight Feed Tray can process up to 60 14 x 17 films per hour in the 90 second mode. Allows two 8 x 10 films to be run side by side.
Innovative rack design for easy care and routine, daily maintenance.
Infrared drying rack for consistent, energy-efficient drying and quiet operation.
Operates on standard 110V power through any wall outlet.

 

SRX-201 A

 The Konica SRX-201A is a compact, super rapid film processor recommended for any mid volume application. It is the perfect choice for ancillary hospital departments, orthopedic centers, outpatient clinics and active dedicated mammography applications. A user friendly control panel allows the operator to easily change process speeds, developer and dryer temperature and adjust replenishment rates. Temperature settings automatically adjust to match each cycle, and can be displayed in Centigrade or Fahrenheit.

Features:

Offers three process speeds: 60 second Super Rapid cycle, a 90 second conventional cycle and 170 second extended cycle.
Microprocessor controlled circuitry precisely regulates temperature replenishment and self-diagnostics.A 17" feed tray can process up to 160 14 x 17 films per hour in 60 second mode.
Incorporates a new Active Circulation System that pumps solution bilaterally through the racks to ensure smooth circulation and maintains active chemistry.
Self-cleaning Developer to Fixer crossover rack reduces routine maintenance.
Uses a jog cycle standby mode and night standby for energy savings.
Operates on 220VAC, 60 Hz; Requires dedicated 20 Amp service.
 

SRX-701

 The Konica SRX-701 is the cornerstone and top of the line of our film processor product family. This five-speed processor offers process options from 45 seconds to 180 seconds to handle all applications, including mammography. This high volume processor is recommended for any hospital, clinic or image center where maximum throughput and efficiency are required. A full feature control panel allows operator changes in speed, temperature and replenishment. A back lit liquid crystal display communicates all processor status information. The SRX-701 also features new innovative rack design for smooth roller transport and quiet operation.

Features:

Offers five process speeds: 45 second, 60 second and 90 second Super Rapid processing cycles, 110 second standard processing cycle and 180 second extended processing cycle.
Microprocessor based circuitry regulates all vital functions including: temperature, replenishment standby timers and integrated self-diagnostic software.
Programmable weekly operation with user selectable daily start-up and shut-down times.
Auto-fill and auto top off of chemicals to compensate for evaporation or user error.
A 17" feed tray can accept and process up to 365 14 x 17 films per hour in the 45 second mode.
New efficient self-rinsing cross-over racks.
Full darkroom mode and emergency help mode.
Computerized QA monitoring captures film & chemical use and offers data print mode for hardcopy report print outs.
Operates on 220VAC, 60 Hz; Requires dedicated 30 Amp service.
AFP Processors
 

Mini-Med 90

 
A quality X-Ray film processor built and priced to make in-house film developing cost-effective for small offices, clinics, satellite health care facilities, and mobile installations. Special versions of this processor are available for those sites desiring to specialize in mammographic film processing.
 

The MINI-MED has been designed to include many time, space, and money saving features found in higher priced models. The MINI-MED is setting a new standard for tabletop film processors.

 

17X4

 

 The 17x4 is designed to develop exposed RP type medical x-ray film of all sizes, from 4"x4" (10 x 10cm) to 14"x36" (35x91cm).  The 17" wide feed tray allows 14"x17" film to be fed widthwise.
 

Hourly production capacity of 17"x14" sheets of film, at the indicated, pre-set, lead edge in to lead edge out time, is 220 sheets per hour. 

Available in 115V/60Hz, 220V/50Hz & 220V/60Hz
 
Rear & front exit versions available Automatic replenishment and standby "No Plumbing" versions for mobile installations Cost effective, space saving and reliable .

 

Hope  Processor

Micro-Max

 

 MicroMax utilizes Hope's unique low torque, no crossover hard roller transport system 
MicroMax's quiet, powerful, low energy dryer easily dries film under any condition 
MicroMax's "dual" automatic replenishment system may replenish either by measuring film area or by flooded replenishment with manual operation back-up! 
Automatic energy and water saving standby system with built-in jog feature. Manual operation back-up! 
Film may be delivered either on top or rear exit 
MicroMax may be installed thru-the-wall at either feed or dryer end 
MicroMax may be set up at different speeds from 90 to 135 seconds 
Plugs into any standard wall outlet 
Cold water operation 
Separate drains provide for quick draining of solutions, closed loop operation and easy use of silver recovery systems 
Light tight feed tray reduces darkroom time and eliminates costly darkroom passage systems 
Digital display of developer and dryer temperatures 
Sales and service supported by factory trained worldwide dealer network 

Options available include


Short feed tray with light tight cover 
Rear exit receiving and light trap kit 
Variable speed control 
Closed loop system (no external plumbing needed) 
Kit for processing of laser imaged film 
Receiving tray insert for full spine films 
Base stand

AGFA Processor

CP 1000

  
CP 1000 Processor is ideal for diagnostic clinics, remote departments, chiropractic and veterinary offices. The CP 1000 provides consistent, high-quality processing of film sizes ranging from 4" x 4" up to 14" W x 36" L for applications with moderate patient film volume.

125-second cycle time (leading edge into developer to leading edge at dryer) for quick access to finished radiographers.

The typical processing cycle for low-volume processors is 2.5 to 3 minutes, and you must remain in the darkroom until the film has completely entered the processor, which can take over a minute. The exclusive CP 1000 Feed Tray/Light Cover allows you to leave the darkroom in about 15 seconds.

Most processors require water, drain plumbing and external replenishment. They consume 16 to 30 gallons of water per hour. The CP 1000 requires no external plumbing, and the wash-water is supplied from its 5-liter (1.3 gallon) dispenser bottle.)

Only .25 gallon of chemical is required to fill the CP 1000 Processor tanks, and they are replenished automatically. Where other processors typically require 5-gallon mixers to keep their tanks full, the CP 1000 uses pre-measured concentrates that make the right amount of developer and fixer to fill the 5-liter dispenser bottles. With the CP 1000 you mix and use less chemistry and it is always fresh.

Does not require professional installation and plumbing. Setting up and installing the CP 1000 takes less than one hour and requires only simple tools.

 

Summit  Processor

QCP
A Processor so Advanced . . . it's simple 

To produce good films just turn on the Summit QCP. State of the art microprocessors control all operations and functions. Advanced anti-crystallization and anti-oxidation programs greatly enhance chemical quality. 

The end of film overlaps. The QCP provides an automatic visual and audible signal when it's ready to accept another film. Quality images, film after film. The unique integral warm-air dryer produces even, consistent film processing and drying.

The QCP fits comfortably into even the smallest darkroom. 
Measuring 30"x23"x16.5", the QCP's amazingly compact size makes this processor ideal for virtually any chiropractic clinic. Chemical handling is easier, cleaner and safer. 

Chemical tanks can be filled automatically, meaning no more spills on the darkroom floor. The uniform, one-piece casing eliminates leaks between the tanks. Easily accessible drain valves provide quick, safer emptying of tanks.

Please contact us for the latest competitive prices